THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY. YOUR USE OF THE INFORMATION ON THE FIELD NOTICE OR MATERIALS LINKED FROM THE FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.
Migration to new field notice system
|Affected OS Type
||Affected Release Number
3.5.2SQ has the fix
||RFGW-10 DS384 Intermittent VoD Black Screen.
An intermittent VoD (Video on Demand) black screen is observed on the display device.
Line card is: RFGW-DS384
The issue might be observed when all of these conditions are present:
In order to check if the system uptime is more than 206 days, enter the show version | i uptime command as shown here:
The root cause is an issue in the DS384 Linecard Operating System. Refer to Cisco bug ID CSCuy39698 for the issue details.
Note: In order to access the Cisco bug ID link above and see detailed bug information, you must be a registered
customer and you must be logged in.
An intermittent black screen on the display device might occur when encrypted VoD sessions are initiated. The error is indicated by the Powerkey/Conditional Access (CA) session being lost and established messages in the Supervisor card's log. Other symptoms include broken pipe events in the linecard log and unusual/negative TCP timer values in the netstat -P command run on the linecard.
This issue is identified by:
*Apr 1 07:14:53.370 UTC: %RFGW-3-LINECARD_ERRMSG_ERR: SLOT 3:LC_ERRMSG_SCS_ALARM_SET EIS:PowerKEY: Connection with CA System lost
*Apr 1 07:15:08.371 UTC: %RFGW-3-LINECARD_ERRMSG_ERR: SLOT 3:LC_ERRMSG_SCS_ALARM_CLEAR EIS: PowerKEY: Connection with CA System Established
*Apr 1 07:15:28.388 UTC: %RFGW-3-LINECARD_ERRMSG_ERR: SLOT 3:LC_ERRMSG_SCS_ALARM_SET EIS: PowerKEY: Connection with CA System lost
- When logged into the DS384 linecard, TCP timers show negative values.
# netstat -P 7f40e4b0
netstat: Server fault on msg pass
TCP Protocol Control Block at 0x7f40e4b0:
REXMT: -2147483532 PERSIST: 0 KEEP: -2146634050 2MSL: 0
State: ESTABLISHED, flags 0x9e0, inpcb 0x7f40dc40, in6pcb 0x0
Note: The netstat -A CLI command lists active Internet connections and the netstat -P CLI command lists the PCB details.
Refer to these details:
This issue has two workarounds and a solution - customers can choose the option that makes the most sense for their situation.
Scenario 1: DS384 linecard redundancy is in place
- Switch the working linecard to the protect card
- Then, revert back
- Ensure the protect linecard has not run continuously for almost 206 days. If so, reset the protect linecard and ensure the protect linecard status is in Standby and does not protect the other linecard.
Scenario 2: No DS384 linecard redundancy
- Restart the linecard with the cable linecard reset CLI command.
- If linecard redundancy is not configured and multiple/all linecards are affected or approach the trigger uptime of 206 days, then it might be more efficient to restart the chassis than each individual linecard.
This issue is fixed in Cisco IOS-XE Releases 3.5.2SQ (SQD02) and later. Hence, an alternative to the workaround is to upgrade to Cisco IOS-XE Release 3.5.2SQ (SQD02) or later.
Cisco IOS-XE 3.5.2SQ Software Download
Cisco IOS-XE 3.5.2SQ Release Notes
For More Information
If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:
Receive Email Notification For New Field Notices
Cisco Notification Service—Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.